Computer Only Reading One Stick of Ram
Hello! My name is Marco, I am an Independent Advisor. I volition do my best to assist y'all.
Try this
Click on Windows Start button and blazon: file explorer
Right click on " this pc " and click "properties"
Now click on " Advanced organization settins "
Under "perfomance" click on "settings"
Click on "Advanced" tab and " change... "
And finally, uncheck the box " Automatically manage paging file size for all drives "
Restart the computer
If information technology worked, you can put back the Automatical Ram usage and wait after that once again if your ram usage is all the same the same every bit before.
Tell me if it worked.
Marco
Was this respond helpful?
Hi Marco
That didn't work:(
I did detect all the same that when i only utilise 1 stick, pc til turn on, just i will not go a post. No screen, nothing beside the pc is running.
This happens merely if i apply the slot on the MB that the manual i refered to as Channel B. If i utilize ane stik (both work) on the other slot (Aqueduct A) the pc til kick up.
But because Bios and cpu-z, and iCue and Nzxt Cam says i take 16gb when both sticks are in, im guessing that Channel B is not useble as a single ram configuration (MB Manual does not mention this thousand.)
one person found this reply helpful
·
Was this reply helpful?
Is 'slot B' the uttermost slot from the processor? If not, test it in this i, i by ane, see if in that location is one that is defective.
Was this reply helpful?
If you use CPU-z are the timings exactly the same for both memory sticks for the speed you are using. Are the voltages correct.
Tin y'all reset the bios to default and bank check again.
Was this reply helpful?
Aye slot B is farthest slot from the CPU, i only have two slots, and both ram stick won't kick up if they are inserted in slot B every bit single stick. But both boot up simply fine if they are i slot A as single.
Was this reply helpful?
Yes the ii sticks are exactly the aforementioned in Cpu-z. They both run at 1066mhz with 1.200v but if i endeavour change the mhz/volt via XMP in Bios, or manually change the volt to 1.350v (reccomended by corsair) in bios and save&exit. Information technology seems the ram keeps setting them self at 1066mhz and 1.200v, it seems like it does not save my changes. Also when i do save&leave i bios. Pc reboot 3 times earlier booting in to windows. Nearly like information technology desire to boot with the new settings but fail, and therefore reboot with default bios settings.
Was this reply helpful?
Ok, it'south weird that information technology'south the furthest away that doesn't work ... To exercise another test, connect a ram in slot b and see if information technology is detected in the bios?
Was this reply helpful?
The problem is that if i only use the slot B, i tin't see if bios detect it, because i don't become whatsoever motion-picture show. No video bespeak, no keyboard or mouse, simply pc running with fans running equally everything was normal.
Was this reply helpful?
Ok, I understand, try an update of your bios ... on the website of your motherboard, you lot should see the firmware of your bios and follow the explanation because if the computer crashes during the update y'all risk to intermission your motherboard forever.
Was this answer helpful?
Bios is now updated to latest version, in that location was two updates newer than my bios version, updated both i release order, but that did not assistance.
Was this reply helpful?
Source: https://answers.microsoft.com/en-us/windows/forum/all/win10-only-see-half-of-ram-installed/9a3bc43f-cec6-4b44-83d2-38debe4f9310
0 Response to "Computer Only Reading One Stick of Ram"
Post a Comment